* A Phillips head screwdriver
* A flat head screwdriver
* A pry tool
Instructions:
1. Turn off the engine and remove the keys from the ignition.
2. Open the glove box and remove the contents.
3. Locate the two Phillips head screws on the sides of the glove box. Remove these screws.
4. Pull the glove box out of the way to expose the stereo.
5. Locate the four Philips head screws that hold the stereo in place. Remove these screws.
6. Gently pry the stereo out of the dashboard using the flat head screwdriver and pry tool.
7. Disconnect the wiring harness from the back of the stereo.
8. Remove the stereo from the vehicle.
