1. Disconnect the negative battery terminal. This will help to prevent any damage to the electrical system.
2. Remove the trim panel around the stereo. There are two screws on the top of the panel and two on the bottom. Use a Phillips head screwdriver to remove them.
3. Remove the four screws that hold the stereo in place. There are two screws on each side of the stereo. Use a Phillips head screwdriver to remove them.
4. Pull the stereo out of the dash. Be careful not to damage any of the wires that are connected to the back of the stereo.
5. Disconnect the wires that are connected to the back of the stereo. There are two wire harnesses, one for power and one for speakers. Use a flat head screwdriver to pry the connectors loose.
6. Remove the old stereo from the vehicle.
7. Install the new stereo by reversing the above steps.
Here are some additional tips for removing the stereo on a 1996 Honda Civic:
- Make sure that you have all of the necessary tools before you begin.
- Be careful not to damage any of the wires or connectors.
- If you are not comfortable removing the stereo yourself, you can take your vehicle to a professional.
