Here are the steps to access and replace the turn signal relay:
1. Open the glove compartment.
2. Locate the four screws that hold the glove compartment in place.
3. Remove the four screws.
4. Gently pull the glove compartment down and out.
5. The turn signal relay is located on the left side of the center console, behind the glove compartment.
6. To remove the relay, gently pry it up and out of its socket.
7. Install the new relay by pressing it into the socket.
8. Replace the glove compartment by inserting it back into its original position and securing it with the four screws.
