1. Head gasket set that includes new head gaskets, intake manifold gaskets, exhaust manifold gaskets, and valve stem seals.
2. Pushrods: You will need to install longer pushrods to accommodate the increased lift of the new camshaft. The length of the pushrods you need will depend on the specific camshaft and cylinder heads you are using.
3. Valve springs: For best performance and to avoid valve float, you might need stronger valve springs. The valve springs you need will depend on the specific camshaft and cylinder heads you are using.
4. Rocker arms: You might also need to install new rocker arms to accommodate the increased lift of the new camshaft. The rocker arms you need will depend on the specific camshaft and cylinder heads you are using.
5. Machine shop service
- Clean and inspect heads for any cracks or damages
- Surface the heads
- Valve job (cutting the valve seat and replacing valve seals)
6. Installation Tools:
- Head bolt tensioner
- Torque wrench
- Socket wrench
- Ratchet wrench
7. Miscellaneous:
- Carburetor adjustment (if applicable)
- Timing chain adjustment
Before you begin, make sure that you have the correct tools and parts. It is also important to follow the instructions that came with your camshaft and cylinder heads carefully.
It is recommended to have this work performed by a professional mechanic.
