- Start by removing the large metal dust cover on the passenger side of the engine.
- The oil filter will be located here, in front of the distributor
>!Oil Filter Specs:
- Honda Part Number: 15400-PAA-003
- Thread specification: 3/4" x 20
- O-ring inside diameter: 2.25"
- O-ring thickness: 0.135"
- Height: 2.875"
- Diameter: 3.0"
1987 Honda Accord 2.0L Engine (Fuel Injected)
- Remove the engine under-cover under the vehicle near the transmission by removing several 12mm bolts.
- The oil filter is located below the rear exhaust manifold on the engine block's left side (driver's side).
>!Oil Filter Specs:
- Honda Part Number: 15400-PLM-A02
- Thread specification: 3/4" x 20
- O-ring inside diameter: 2.25"
- O-ring thickness: 0.135"
- Height: 3.0"
- Diameter: 2.95"