The input speed sensor is located on the transmission and measures the speed of the transmission input shaft. This information is used by the ECU to calculate the engine speed and to control the fuel injection and ignition timing.
If you are experiencing problems with your 2001 Hyundai Santa Fe, such as rough running, stalling, or not starting, it is possible that the input speed sensor is faulty. You can check the sensor by inspecting the wire for breaks or damage. If the wire is damaged, you will need to replace the sensor.
Here are some tips for replacing the input speed sensor on a 2001 Hyundai Santa Fe:
* Disconnect the negative battery terminal.
* Locate the input speed sensor on the transmission.
* Disconnect the electrical connector from the sensor.
* Unscrew the sensor from the transmission.
* Install the new sensor.
* Reconnect the electrical connector.
* Reconnect the negative battery terminal.
If you are not comfortable replacing the input speed sensor yourself, you can take your vehicle to a qualified mechanic.