- Wrench set
- Socket set
- Screwdriver
- Pliers
- Fan clutch removal tool (optional)
1. Disconnect the negative battery terminal.
2. Locate the fan clutch on the front of the engine. It is the large, circular component that is attached to the water pump.
3. Loosen the bolts that hold the fan clutch in place. There are usually four bolts, located around the perimeter of the fan clutch.
4. Remove the bolts and take off the fan clutch. Be careful not to drop the bolts into the engine compartment.
5. If the fan clutch is stuck, you may need to use a fan clutch removal tool to remove it.
6. Once the fan clutch is removed, you can install the new fan clutch by reversing the steps above.
Tips:
* Make sure that the new fan clutch is the correct size and type for your vehicle.
* Tighten the bolts that hold the fan clutch in place securely.
* Reconnect the negative battery terminal.
