Where is the windshield washer pump in a 2002 Jeep Liberty?

1. Open the hood of your Jeep Liberty and locate the windshield washer fluid reservoir. It is a translucent plastic tank located on the passenger side of the engine compartment.

2. Follow the hose from the reservoir to the windshield washer pump. The pump is a small, black, cylindrical device located near the bottom of the reservoir.

3. Disconnect the electrical connector from the pump by pressing down on the release tab and pulling the connector straight up.

4. Use a wrench to loosen the two bolts that hold the pump in place.

5. Remove the pump from the reservoir.

6. To install the new pump, simply reverse the steps above.