2. Remove the spark plug wires. To remove a spark plug wire, simply pull it off of the spark plug. Be careful not to damage the wire.
3. Label the spark plug wires. Before you remove all of the spark plug wires, it is important to label them so that you know which wire goes to which spark plug. You can do this by using a piece of tape or a marker.
4. Replace the spark plug wires. To replace a spark plug wire, simply push it onto the spark plug. Make sure that the wire is seatedしっかりと securely.
5. Repeat steps 2-4 for the remaining spark plug wires.
6. Check the spark plug wires for proper fit. Once all of the spark plug wires are replaced, check them to make sure that they are seated firmly. You can do this by gently pulling on each wire. If a wire comes off, it is not seated properly.
7. Start the engine. Once you are sure that all of the spark plug wires are seated properly, you can start the engine.
