1. Locate the battery:
- The battery is located inside the remote.
- To access the battery, you must pry open the remote, usually by inserting a flathead screwdriver into a small slot and gently lifting it open.
2. Remove the old battery:
- Once the remote is open, you will see the battery.
- It is usually a small, round, silver battery.
- To remove the battery, gently pry it out of its compartment using your fingers or a small tool.
3. Insert the new battery:
- Take the new battery and insert it into the compartment, making sure that the positive (+) side of the battery is facing up.
- Press the battery down gently until it is securely in place.
4. Close the remote:
- Once the new battery is inserted, close the remote by snapping it shut.
- Make sure that the remote is closed tightly so the battery does not fall out.
5. Test the remote:
- Once the remote is closed, test it to make sure it is working properly.
- Press the buttons on the remote and see if they activate the desired functions.
6. Dispose of the old battery:
- Remember to dispose of the old battery properly.
- Many stores and recycling centers accept old batteries for safe disposal.
