Auto >> AutoSPT >  >> Electric car

How do you drain transmission fluid on a 1995 Toyota Camry 4 cylinder?

To drain the transmission fluid on a 1995 Toyota Camry 4 cylinder, follow these steps:

1. Park your car on a level surface. Turn off the engine and allow it to cool down.

2. Crawl under the car and locate the transmission oil pan. It is a metal pan located under the transmission.

3. Place a drain pan under the transmission oil pan. Make sure the drain pan is large enough to catch all of the fluid that will drain out.

4. Loosen the drain plug on the transmission oil pan. Use a wrench to loosen the drain plug until it is completely removed.

5. Allow the transmission fluid to drain out. This may take a few minutes.

6. Reinstall the drain plug on the transmission oil pan. Tighten the drain plug until it is snug.

7. Add new transmission fluid to the transmission. Use a funnel to add the new fluid to the transmission. The owner's manual for your car will tell you how much fluid to add.

8. Check the transmission fluid level. Use the dipstick to check the transmission fluid level. The fluid level should be between the "FULL" and "ADD" marks on the dipstick.

Here are some tips for draining the transmission fluid on a 1995 Toyota Camry 4 cylinder:

* Be careful not to spill any transmission fluid on yourself or the ground. Transmission fluid is a petroleum product and can be harmful if it is ingested or absorbed through the skin.

* If you have any questions about how to drain the transmission fluid on your car, consult the owner's manual or a qualified mechanic.

* Draining the transmission fluid can be a messy job, so be sure to wear old clothes and shoes that you don't mind getting dirty.