- Spark plug socket
- Spark plug wrench
- Ratchet
- Extension
- New spark plugs
Instructions:
1. Open the hood of your PT Cruiser.
2. Locate the spark plugs. They are located on the top of the engine, near the front of the vehicle.
3. Remove the spark plug wires. Use the spark plug wrench to loosen the nuts holding the wires in place, then pull the wires off of the spark plugs.
4. Use the spark plug socket and ratchet to remove the old spark plugs.
5. Install the new spark plugs. Use your fingers to thread the new spark plugs into place, then tighten them using the spark plug wrench.
6. Reattach the spark plug wires. Push the wires onto the spark plugs until they snap into place.
7. Tighten the nuts holding the spark plug wires in place.
8. Close the hood of your PT Cruiser.
