* Wrench
* Socket set
* Pry bar
Instructions:
1.) Park the vehicle on a flat surface and engage the parking brake.
2.) Raise the front of the vehicle and support it on jack stands.
3.) Locate the sway bar links. They are located on the underside of the vehicle, near the front wheels.
4.) Use a wrench to loosen the nuts that hold the sway bar links in place.
5.) Use a pry bar to pry the sway bar links off of the sway bar.
6.) Remove the nuts and washers that hold the sway bar links in place.
7.) Install the new sway bar links.
8.) Tighten the nuts and washers that hold the sway bar links in place.
9.) Lower the vehicle and remove the jack stands.
