1. Park the car on a level surface and turn off the engine.
2. Allow the engine to cool down completely.
3. Open the hood.
4. Locate the radiator cap. It is usually black and located on the top of the radiator.
5. Carefully remove the radiator cap. Be careful, as the coolant may be hot.
6. Start the engine and let it run for a few minutes.
7. As the engine is running, watch the coolant level in the radiator. If the level drops, add more coolant until it reaches the "Full" mark.
8. Replace the radiator cap and close the hood.
9. Test drive the car for a few minutes to circulate the coolant and ensure that there are no more air pockets.
Note: If you are having trouble bleeding the air from the cooling system, you may need to use a funnel or a vacuum pump to help remove the air pockets.
