Power consumption calculation by 1 ton ac?

The power consumption of an air conditioner is measured in watts (W). The power consumption of a 1-ton AC can vary depending on its efficiency and the specific model. Here's a general calculation to estimate the power consumption of a 1-ton AC:

1. Determine the cooling capacity: A 1-ton AC typically has a cooling capacity of 12,000 British Thermal Units per hour (BTU/h).

2. Convert BTU/h to watts: To convert BTU/h to watts, multiply the BTU/h value by 0.293. So, 12,000 BTU/h is equal to 12,000 x 0.293 = 3,516 watts.

3. Consider the energy efficiency ratio (EER): The EER is a measure of an AC's efficiency. The higher the EER, the more efficient the AC. A typical EER for a 1-ton AC might be around 10.

4. Calculate the power consumption: To calculate the power consumption, divide the cooling capacity in watts by the EER. So, in this case, the power consumption would be 3,516 watts / 10 = 352 watts.

Therefore, a 1-ton AC with an EER of 10 would consume approximately 352 watts of power when operating at full capacity. However, it's important to note that the actual power consumption may vary depending on factors such as the ambient temperature, room size, insulation, and usage patterns.