Auto >> AutoSPT >  >> Engine

How do you check the oil level on a 1978 Honda Goldwing gl1000?

To check the oil level on a 1978 Honda Goldwing gl1000, follow these steps:

1. Make sure the motorcycle is on level ground.

2. Start the engine and let it idle for a few minutes.

3. Turn off the engine and wait a few minutes for the oil to settle.

4. Locate the oil sight glass on the left side of the engine, under the left side cover.

5. Look at the oil level in the sight glass. The oil should be between the two marks on the sight glass.

6. If the oil level is low, add oil through the oil filler cap on the top of the engine.

7. Start the engine and let it idle for a few minutes.

8. Turn off the engine and wait a few minutes for the oil to settle.

9. Recheck the oil level in the sight glass. The oil should be between the two marks on the sight glass.

Auto Repair
Help Your Vehicle Go Green this St. Patrick’s Day How do you change the front brake pads on a 1994 GMC suburban?
Car Care
10 Interior Car Detailing Tips From The Pros Choosing Your Next Classic Car Restoration Project How Bad is Cheap Gas for Your Car?
Engine
Where do you find temperature 1986 305 engine? Where do you put the transmission fluid in a 1992 Mercedes 190e?
Electric Car
Eliminate the rev limiter on a 94 Chevy 350? The guilt-free way to SUV ownership What is the estimated horsepower of a Pontiac 455 with xe274h-10 comp cam bored 60 over 6x4 heads?
Autopilot
How do you make a real speedometer? What does the orange triangle above odometer in a Mercedes Benz 320 CLK mean?
Car Photos
What are british classic cars called? Do corvette seats fit in a 1979 Camaro? 1936 Buick special convertable information and history?