_Changing the oil in your 2003 Harley Davidson Street Glide is a simple task that can be completed in about 30 minutes._ Here is a step-by-step guide to help you get started:
1.) Gather your materials. You will need:
- New oil filter (Harley-Davidson part number 63801-03)
- New crush washer (Harley-Davidson part number 63619-85)
- 4 quarts of Harley-Davidson SYN3 synthetic oil
- Oil drain pan
- Funnel
- Wrench
- Rags
2.) Prepare your motorcycle. Park your motorcycle on a level surface. Turn off the engine and allow it to cool down completely. Engage the parking brake.
3.) Locate the oil drain plug. The oil drain plug is located on the bottom of the engine, just behind the oil filter.
4.) Place the oil drain pan under the oil drain plug. Make sure the pan is large enough to catch all of the oil that will drain out.
5.) Remove the oil drain plug. Use the wrench to loosen the oil drain plug. Be careful not to drop the bolt into the oil pan.
6.) Allow the oil to drain. Allow all of the oil to drain out of the engine. This may take a few minutes.
7.) Replace the oil drain plug. Once all of the oil has drained out, replace the oil drain plug. Tighten the plug until it is snug.
8.) Locate the oil filter. The oil filter is located on the front of the engine, just below the cylinder head.
9.) Remove the oil filter. Use the wrench to loosen the oil filter. Be careful not to spill any oil.
10.) Apply a thin coat of new oil to the gasket of the new oil filter. This will help to create a seal and prevent leaks.
11.) Screw on the new oil filter. Hand-tighten the oil filter until it is snug. Do not overtighten the oil filter.
12.) Add new oil to the engine. Use the funnel to add 4 quarts of new oil to the engine.
13.) Check the oil level. Use the dipstick to check the oil level. The oil level should be between the "full" and "add" marks on the dipstick.
14.) Start the motorcycle and let it run for a few minutes. This will circulate the new oil throughout the engine.
15.) Check for leaks. Look for any leaks around the oil drain plug and oil filter. If you see any leaks, tighten the bolts until the leaks stop.
That's it! You have now successfully changed the oil in your 2003 Harley Davidson Street Glide.
Here are a few additional tips for maintaining your Street Glide:
- Check the oil level regularly. The oil level should be checked every time you fill up your gas tank.
- Change the oil every 5,000 miles or once a year, whichever comes first.
- Inspect the oil filter every time you change the oil. If the oil filter is dirty, replace it.
- Keep your motorcycle clean. A clean motorcycle will help to prevent dirt and debris from entering the engine.
- Follow the maintenance schedule in your owner's manual. The maintenance schedule will tell you what maintenance tasks need to be performed at specific intervals.
By following these tips, you can help keep your Street Glide running smoothly for years to come.
