Were to place motoclcye lift jack on a goldwing 1500?

The best locations to place a motorcycle lift jack on a Goldwing 1500 are the frame tubes underneath the engine. These tubes are sturdy and can easily support the weight of the motorcycle. To access these tubes, you may need to remove the fairing lowers. Once the fairing lowers are removed, you will see two frame tubes running parallel to the engine. Place the motorcycle lift jack under these tubes, making sure that the weight is evenly distributed.

For additional safety, you can place a block of wood or a rubber pad between the motorcycle lift jack and the frame tubes to prevent any damage to the finish.

Here is a more detailed explanation of the process:

1. Park your motorcycle on a level surface and turn off the engine.

2. Remove the fairing lowers, following the instructions in the motorcycle's service manual.

3. Locate the two frame tubes running parallel to the engine.

4. Position the motorcycle lift jack under the frame tubes, making sure that the weight is evenly distributed.

5. If desired, place a block of wood or rubber pad between the motorcycle lift jack and the frame tubes to protect the finish.

6. Raise the motorcycle lift jack until the motorcycle is lifted off the ground.

Never place the motorcycle lift jack under any other part of the motorcycle, such as the fuel tank or the bodywork, as this could damage the motorcycle.