The Suzuki Eiger is an all-terrain vehicle (ATV) manufactured by Suzuki Motor Corporation. It is powered by a four-stroke, single-cylinder engine with a displacement of 400 cubic centimeters (cc). The Eiger is available in two models, the Eiger 400 and the Eiger 400F. The Eiger 400 is a two-wheel drive model, while the Eiger 400F is a four-wheel drive model.
The Eiger's engine requires a high-quality, four-stroke engine oil that meets or exceeds the following specifications:
* API Service Classification: SG, SH, SJ, SL, SM, or SN
* SAE Viscosity Grade: 10W-40
It is important to use the correct type of oil in your Eiger's engine to ensure proper lubrication and protection of the engine's components. Using the wrong type of oil can cause damage to the engine and void the warranty.
Suzuki Eiger Oil Capacity
The Eiger's engine oil capacity is 2.6 quarts (2.5 liters). It is important to add the correct amount of oil to the engine to ensure proper lubrication. Adding too much oil can cause the engine to overheat and damage the engine's components. Adding too little oil can cause the engine to seize and damage the engine's components.
Suzuki Eiger Oil Change Interval
The Eiger's oil should be changed every 600 miles (1,000 kilometers) or once a year, whichever comes first. It is also important to change the oil more frequently if the Eiger is used in dusty or dirty conditions.
Suzuki Eiger Oil Change Procedure
To change the oil in your Eiger, follow these steps:
1. Warm up the engine by running it for a few minutes. This will help to thin the oil and make it easier to drain.
2. Turn off the engine and remove the oil drain plug. The oil drain plug is located on the bottom of the engine.
3. Allow the oil to drain into an oil drain pan.
4. Replace the oil drain plug.
5. Remove the oil filter. The oil filter is located on the side of the engine.
6. Apply a thin coat of new oil to the gasket of the new oil filter.
7. Screw the new oil filter onto the engine.
8. Add the correct amount of new oil to the engine.
9. Start the engine and let it run for a few minutes. This will help to circulate the new oil throughout the engine.
10. Check the oil level and add more oil if necessary.
By following these steps, you can easily change the oil in your Suzuki Eiger.
