Steps:
1. Warm up the bike for a few minutes. This will help the oil drain more easily.
2. Place a drain pan under the oil drain plug, which is located on the bottom of the bike, below the oil filter.
3. Loosen the oil drain plug using a 17mm wrench. Be careful not to drop the washer.
4. Allow the oil to drain completely.
5. Replace the washer on the oil drain plug and tighten it securely.
6. Refill the bike with the recommended amount of oil. Refer to your owner's manual for the correct amount.
Tips:
-If your bike has a fairing or other bodywork that covers the oil drain plug, you may need to remove it in order to access the plug.
-If the oil drain plug is stuck, you may need to use a penetrating oil or heat to loosen it.
-Be sure to dispose of the old oil and filter properly.
