However, it's important to note:
* Always check your owner's manual for the most accurate information. There may be slight variations depending on the specific model and options.
* Consider using a dipstick to check the oil level before adding any. Overfilling can cause damage to your engine.
For a safe and accurate oil change, follow these steps:
1. Warm up the engine for a few minutes. This will allow the oil to flow more freely and ensure an accurate reading.
2. Park your vehicle on a level surface and engage the parking brake.
3. Locate the oil dipstick and remove it.
4. Wipe the dipstick clean with a rag.
5. Insert the dipstick fully back into the tube.
6. Remove the dipstick and check the oil level. The level should be between the "full" and "low" marks.
7. If the oil level is low, add the appropriate amount of oil.
Remember, it's essential to use the recommended oil type and viscosity for your vehicle. Consult your owner's manual for specific recommendations.
