Auto >> AutoSPT >  >> Engine

What is a bolt pattern for 84 Oldsmobile cutlass supreme?

The bolt pattern for a 1984 Oldsmobile Cutlass Supreme depends on whether it has a 4-cylinder or a V6/V8 engine. There's no single answer.

* Most likely: 5 x 4.75 inches (5 lug, 4.75 inch bolt circle diameter) is the most common bolt pattern for this vehicle.

* Less likely, but possible: Some models might have a different pattern, though it's rare for this year. You must verify the pattern on your specific car.

To find your specific bolt pattern:

1. Look at your existing wheels: The bolt pattern is often stamped on the back of the wheel.

2. Check your owner's manual: If you have the original owner's manual, it should list the specifications, including the bolt pattern.

3. Look at the hub: Sometimes, the bolt pattern can be seen by looking at the wheel hub itself. Be careful when doing this.

4. Use a wheel-fitting website: Input your vehicle's year, make, and model into a website that specializes in wheel and tire fitments. These sites can usually determine the bolt pattern.

Do not rely solely on generic information; always confirm the bolt pattern on your specific car before purchasing wheels or tires. Using the wrong bolt pattern can be extremely dangerous.