Auto >> AutoSPT >  >> Engine

How do you change a fuel pump on 1971 fury?

Replacing a fuel pump on a 1971 Plymouth Fury is a moderately challenging job, requiring some mechanical aptitude and the right tools. Here's a general overview; always consult a repair manual specific to your 1971 Fury's engine (e.g., a factory service manual or a Chilton's/Haynes manual) for detailed instructions and torque specifications. Improper installation can lead to serious damage.

Safety First:

* Disconnect the negative battery cable before starting any work on the fuel system. This prevents sparks that could ignite fuel vapors.

* Work in a well-ventilated area. Fuel vapors are flammable and hazardous.

* Wear safety glasses to protect your eyes from debris.

* Use jack stands if you need to lift the car. Never work under a car supported only by a jack.

Steps (General Outline - Consult Your Manual for Specifics):

1. Locate the Fuel Pump: The fuel pump on a 1971 Fury is typically located on the engine block or on the frame near the engine. Your repair manual will show the exact location.

2. Drain the Fuel Tank (Partially): This reduces the amount of fuel that could spill during the process. You can use a siphon pump or carefully drain some fuel through the fuel line.

3. Disconnect Fuel Lines: Carefully disconnect the fuel lines leading to and from the fuel pump. You'll likely need fuel line clamps and possibly a wrench. Have rags ready to soak up any spilled fuel. Mark the lines to ensure proper reassembly.

4. Disconnect Electrical Connections: Disconnect the electrical connector from the fuel pump.

5. Remove the Fuel Pump: This is where the method varies greatly depending on your Fury's engine and the specific fuel pump design. It might involve:

* Removing mounting bolts: The pump may be bolted directly to the engine block or a mounting bracket.

* Removing a fuel pump cover: Some designs have a cover that needs to be removed before accessing the pump.

* Removing the pump from the fuel pump housing: In some cases, the pump is inside a housing that needs to be disassembled.

6. Install the New Fuel Pump: Follow the steps in reverse order to install the new fuel pump. Ensure all connections are secure and properly seated. Pay particular attention to the fuel lines and their orientation.

7. Reconnect Fuel Lines and Electrical Connections: Double-check all connections before proceeding.

8. Reconnect the Battery Cable: Reconnect the negative battery cable.

9. Check for Leaks: After reconnecting everything, carefully check for fuel leaks around the fuel pump and fuel lines.

10. Start the Engine: Start the engine and listen for any unusual noises from the fuel pump or fuel system. Check for leaks again.

Important Notes:

* Fuel pump gaskets and seals: Replace any old gaskets or seals with new ones to prevent leaks.

* Fuel filter: Consider replacing the fuel filter while you're working on the fuel system.

* Fuel pump type: Ensure you purchase the correct fuel pump for your 1971 Fury's engine. The specifications should be in your repair manual or available from auto parts stores.

This is a simplified overview. A detailed repair manual specific to your vehicle is absolutely essential. Attempting this repair without the proper information and tools can lead to damage to your vehicle or personal injury. If you're uncomfortable performing this repair yourself, consider taking your car to a qualified mechanic.