Where is the coolant drain plug in a 94 Chrysler Concorde?

The coolant drain plug on a 1994 Chrysler Concorde is located on the bottom of the engine block. However, it's not easily accessible and requires getting underneath the car. There isn't one single, universally agreed-upon location described in readily available repair manuals; the exact position can vary slightly depending on the engine (3.3L or 3.5L V6).

To find it, you'll need to:

1. Get under the car safely: Use jack stands and follow proper safety procedures. Never work under a car supported only by a jack.

2. Locate the engine block: It's the large, main part of the engine.

3. Look towards the front of the engine block: The drain plug is typically near the bottom of the engine, somewhat towards the front.

4. It will be a bolt or plug: It might be a hex-head bolt or a simpler plug. It's likely to be somewhat smaller than other bolts in the area.

Important Note: Before draining, consult a repair manual specific to your 1994 Chrysler Concorde's engine type (3.3L or 3.5L) for the exact location and proper draining procedure. This will help prevent damage or unnecessary complications. A picture from a repair manual showing the location would be immensely helpful.