What is the bolt pattern for a 1970 Dodge coronet wheel?

The bolt pattern for a 1970 Dodge Coronet varies depending on the model and options. While many used a 5x4.5" (5 lug, 4.5 inch bolt circle diameter) pattern, some might have had different patterns depending on the engine and wheel size.

To be certain, you need to check one of the following:

* The owner's manual: This is the most reliable source.

* The wheels themselves: The bolt pattern is usually stamped on the back of the wheel.

* The vehicle's data plate: Often located in the glove compartment or on the driver's side doorjamb.

* A Dodge parts catalog for 1970: These can be found online or at some automotive parts stores.

Don't rely solely on general information; verify it using one of the sources listed above. Using the wrong bolt pattern is dangerous and could lead to wheel failure.