However, there's no single definitive answer without knowing the specific engine and options on your Tempo. Some sources place it in the under-hood fuse box, while others specify the Power Distribution Box. Therefore, your best bet is:
1. Consult your owner's manual: This is the most reliable source. It should have a diagram showing the location of all relays and fuses.
2. Locate the Power Distribution Box (PDB): Look near the battery for a large box with numerous fuses and relays. The cover should have a diagram printed on it or inside it.
3. Look for a diagram within the fuse/relay box: The diagram should identify the fuel pump relay. It may be labeled "Fuel Pump," "EFI," or have a similar designation. The relay itself will likely be a standard automotive relay – a small square or rectangular component.
4. If you can't find it visually: Use a test light or multimeter to check the power circuit to the fuel pump. This will require some electrical knowledge and caution to avoid electric shock.
Caution: Always disconnect the negative battery terminal before working on electrical components in your vehicle to prevent accidental shorts and injury.
