Essential Parts:
* Spark Plugs: The correct type and heat range for your specific engine is crucial. Check your owner's manual for the exact specification, or consult a parts store providing your VIN. They're usually iridium or platinum plugs for longer life.
* Spark Plug Wires (if applicable): The 6.0L may have coil-on-plug (COP) ignition, meaning each plug has its own ignition coil directly mounted on it. If it *does* have separate wires, you'll need a complete set. Again, consult the manual or parts store.
* Air Filter: A new air filter is always recommended during a tune-up.
Recommended Parts (Consider these highly recommended, depending on mileage and condition):
* Fuel Filter: Replacing the fuel filter every few years is good preventative maintenance.
* PCV Valve (Positive Crankcase Ventilation): This valve can become clogged and should be checked and replaced if necessary. It's a relatively inexpensive part.
* Throttle Body Cleaning: A thorough cleaning of the throttle body can improve engine response. You'll need throttle body cleaner spray.
* Mass Airflow Sensor (MAF) Cleaning: Similar to the throttle body, a clean MAF sensor ensures accurate air/fuel mixture. Use a MAF sensor cleaner specifically designed for this purpose.
Tools:
* Socket set and wrenches: Various sizes will be needed depending on the specific fasteners.
* Spark plug socket: A deep-well socket of the correct size is essential for removing and installing spark plugs without damaging them. A spark plug gap tool might also be helpful if you're not using pre-gapped plugs.
* Wrench or pliers for fuel filter and PCV valve (if applicable).
* Screwdrivers (potentially): For accessing some components, like the air filter housing.
* Shop rags or paper towels: For cleaning.
* Owner's manual: Absolutely essential for specific torque specifications, part numbers and procedures.
Important Note: This is a general guide. The exact parts and tools needed might vary slightly depending on your specific vehicle's configuration and the condition of its components. Always consult your owner's manual for precise instructions and specifications before attempting any maintenance. If you are not comfortable performing this work yourself, it's always best to have a qualified mechanic perform the tune-up.
