1. Park your vehicle on a level surface. Make sure the vehicle is in Park and the engine is off.
2. Open the hood of your vehicle. Locate the two headlight adjustment screws on the top of each headlight housing.
3. Use the Phillips-head screwdriver to turn the adjustment screws. To raise the headlight beam, turn the screw clockwise. To lower the beam, turn the screw counterclockwise.
4. Use the tape measure to measure the distance from the center of each headlight to the ground. The beam should be aimed so that it hits the ground 25 feet in front of the vehicle.
5. Repeat steps 2-4 for the other headlight.
6. Close the hood of your vehicle.
