Tools:
-Flat-head screwdriver
-Phillips-head screwdriver
-Torx screwdriver set
Procedure:
1. Open the vent window.
2. Locate the two flat-head screws near the top and bottom of the vent window frame.
3. Use a flat-head screwdriver to loosen these screws.
4. Locate the two Phillips-head screws behind the interior door handle.
5. Use a Phillips-head screwdriver to remove these screws.
6. Locate the two Torx screws located at the corners of the vent window frame, inside the door.
7. Use a Torx screwdriver to remove these screws.
8. Carefully lift the vent window out of the door.
The rear passenger windows are fixed and can't be removed without cutting into the pillars near the rear-quarter window which you can remove to allow air-flow.
