The viscosity of the oil must be appropriate for the climate in which the vehicle is operated. In most cases, a 5W-30 or 10W-40 oil is recommended.
* SAE Viscosity Grade: 5W-30
* BMW Specification: BMW Longlife-01.
* Capacity: 6.9 quarts (6.5 liters).
* Change Interval: Every 12,500 miles or once a year, whichever comes first.
It's important to use only high-quality oil that meets BMW's specifications. Using the wrong oil can damage the engine and void the warranty.
Here are some additional tips for changing the oil in your BMW X5:
* Make sure the vehicle is parked on level ground.
* Turn off the engine and allow it to cool down.
* Open the hood and locate the oil filter housing. It is usually located on the top of the engine, near the front.
* Remove the oil filter housing cap and take out the old oil filter.
* Clean the oil filter housing with a clean rag.
* Insert the new oil filter into the housing and screw on the cap.
* Lower the vehicle and start the engine.
* Let the engine run for a few minutes and check for any leaks.
* Turn off the engine and check the oil level. Add more oil if necessary.
Changing the oil in your BMW X5 is a relatively simple task that can be done in about 30 minutes. By following these tips, you can ensure that your engine is properly lubricated and protected.
