- 2 wheels (16-inch diameter or larger)
- 2 wooden dowels (1.25 inches in diameter and 18 inches long)
- 4 washers (1.25 inches in diameter)
- 4 bolts (1/4 inch x 4 inches)
- Nuts and bolts (1/2 inch x 1 inch)
- Drill with a 1/2-inch bit
- Wrench
Steps:
1. Preparation:
- Position your chicken tractor in a stable location.
2. Drill Dowel Holes:
- Mark two points on the bottom of the chicken tractor, 18 inches apart.
- Drill two 1/2-inch holes through these points.
3. Attach Washers:
- Place a washer on each end of a wooden dowel.
4. Slide Through Holes:
- Slide the dowel through the holes in the chicken tractor so that the washers rest against the wood.
5. Attach Second Washer:
- On the inside of the chicken tractor, place a washer over each end of the dowel and secure with a bolt and nut.
6. Attach Wheels:
- Position the wheels on the ends of the dowels, with the bolts inserted through the center holes.
- Secure the wheels with washers and nuts.
7. Test Wheels:
- Gently rotate the wheels to ensure they move smoothly.
- If necessary, adjust the position of the wheels or dowels to ensure proper alignment.
Your chicken tractor is now equipped with wheels, making it easier to move around your yard or property. Enjoy!
