The CDI box on a Yamaha BW200 is located behind the right side cover of the big wheel. It is a small black box with a number of wires connected to it. The CDI box is responsible for controlling the ignition timing of the engine. When the CDI box fails, the engine will not start or run properly.
To replace the CDI box, you will need to:
1. Remove the right side cover of the BW200.
2. Locate the CDI box.
3. Disconnect the wires from the CDI box.
4. Remove the CDI box from the bike.
5. Install the new CDI box.
6. Reconnect the wires to the CDI box.
7. Install the right side cover of the BW200.
Here are some tips for replacing the CDI box on a Yamaha BW200:
* Make sure that the new CDI box is the correct part number for your bike.
* Be careful not to damage the wires when you are disconnecting them from the CDI box.
* If you are not comfortable working on your own bike, you can have the CDI box replaced by a qualified mechanic.
