Here is a more detailed explanation:
From the tank to the carburetor:
1. Locate the fuel inlet nipple on the carburetor. It is usually a small, brass nipple located on the side or bottom of the carburetor.
2. Cut a piece of fuel line long enough to reach from the fuel tank to the inlet nipple on the carburetor.
3. Attach the fuel line to the inlet nipple on the carburetor by pushing it on until it clicks into place.
4. Secure the fuel line to the carburetor with a zip tie or clamp.
From the carburetor to the tank:
1. Locate the fuel outlet nipple on the fuel tank. It is usually a small, brass nipple located on the bottom or side of the tank.
2. Cut a piece of fuel line long enough to reach from the carburetor to the outlet nipple on the fuel tank.
3. Attach the fuel line to the fuel tank by pushing it on until it clicks into place.
4. Secure the fuel line to the tank with a zip tie or clamp.
Please note that some weed whackers may have different fuel line routing, so it's a good idea to consult the owner's manual for your specific model if you are unsure.
