- Fuel hose: This hose carries fuel from the fuel tank to the carburetor. It should be connected to the inlet port on the carburetor, which is usually located on the side or top.
- Vacuum hose: This hose connects the carburetor to the intake manifold. It creates a vacuum that draws fuel from the carburetor into the engine. The vacuum hose should be connected to the port on the carburetor that is marked "VAC" or "VACUUM".
- Vent hoses: There may be one or two vent hoses connected to the carburetor. These hoses allow air to escape from the carburetor and help prevent flooding. They should be connected to the ports on the carburetor that are marked "VENT" or "AIR".
- Overflow hose: This hose allows excess fuel to drain from the carburetor. It should be connected to the port on the carburetor that is marked "OVERFLOW" or "DRAIN".
It's important to make sure that all of the hoses are properly connected and that there are no leaks. If you are unsure of how to connect the hoses, you can refer to a service manual or ask a qualified mechanic for assistance.
