* Use a Phillips head screwdriver to remove the two screws located at the rear of the seat cowl.
* Lift up the seat cowl to remove it.
2. Remove the seat bolts.
* Locate the two bolts located at the front of the seat.
* Use a 12mm socket wrench to loosen the bolts.
* Remove the bolts and set them aside.
3. Remove the seat.
* Lift the seat up and off the motorcycle.
4. Reinstall the seat.
* Place the seat onto the motorcycle.
* Make sure that the seat is properly aligned with the seat bolts.
* Insert the seat bolts and tighten them using a 12mm socket wrench.
* Reinstall the seat cowl and tighten the screws using a Phillips head screwdriver.
