The Yamaha Phazer II uses a chain case to transfer power from the engine to the rear wheel. The chain case contains a chain, a sprocket, and a lubricant. The lubricant helps to reduce friction between the chain and the sprocket, and it also helps to protect the chain from wear and corrosion.
The type of oil that you use in your Phazer II chain case is important. You should use a high-quality oil that is specifically designed for use in chain cases. This type of oil will have the right viscosity and additives to protect your chain and sprocket.
The following oils are recommended for use in Yamaha Phazer II chain cases:
* Yamaha Chain Case Oil
* Bel-Ray Chain Case Oil
* Motul Chain Case Oil
* Maxima Chain Case Oil
Checking the Oil Level
The oil level in the chain case should be checked regularly. The oil level should be between the "full" and "add" marks on the oil sight glass. If the oil level is low, you should add enough oil to bring it up to the "full" mark.
Changing the Oil
The oil in the chain case should be changed every 3,000 miles or once a year, whichever comes first. To change the oil, you will need to:
1. Remove the drain plug from the bottom of the chain case.
2. Drain the old oil into a suitable container.
3. Replace the drain plug.
4. Remove the oil filler plug from the top of the chain case.
5. Add new oil to the chain case until it reaches the "full" mark on the oil sight glass.
6. Replace the oil filler plug.
Tips
* When changing the oil, be sure to inspect the chain and sprocket for wear and damage. If the chain or sprocket is worn or damaged, it should be replaced.
* You can also add an oil additive to the chain case to help improve the performance of the chain and sprocket.
