2. Open the affected door and remove the bolts that secure the door panel to the door frame.
3. Use a flat-head screwdriver to carefully pry loose the door panel from the door frame, starting from one corner and working your way around.
4. Disconnect any electrical connectors that are attached to the door panel, such as the power window switch connector and the door lock switch connector.
5. Remove the door panel from the door and set it aside.
6. Locate the window track and inspect it for any damage or obstructions.
7. If the window track is damaged, you will need to replace it.
8. If the window track is clear, you can proceed to put the window back on track.
9. To do this, simply insert the bottom of the window into the track and then slide it up until it is in the correct position.
10. Once the window is back on track, you can reattach the door panel to the door frame.
11. Reconnect any electrical connectors that you disconnected earlier.
12. Secure the door panel to the door frame with the bolts that you removed earlier.
13. Test the window to make sure that it is working properly.
