1. Gather the necessary tools. You will need a pry tool, a flat-head screwdriver, and a Phillips-head screwdriver.
2. Remove the door panel. Start by removing the screws that hold the door panel in place. There are usually two or three screws at the top of the panel and one at the bottom. Once the screws are removed, use the pry tool to carefully pry the panel off the door. Be careful not to damage the panel or the door.
3. Locate the window lever. Once the door panel is removed, you will be able to see the window lever. It is usually located on the inside of the door, near the door handle.
4. Disconnect the window lever. There is a cable that connects the window lever to the window regulator. Disconnect the cable from the window lever.
5. Remove the window lever. Once the cable is disconnected, you can remove the window lever by unscrewing the screws that hold it in place. Be careful not to drop the screws.
6. Install the new window lever. To install the new window lever, simply reverse the steps you took to remove the old window lever.
Here are some additional tips:
* If the window lever is stuck, you may need to use a penetrating oil to loosen it up.
* Be careful not to damage the window regulator when removing the window lever.
* If you have any questions, consult a professional.
