* Step 1: Clean the threads of the flywheel and pressure plate bolts with a wire brush to ensure there is no debris or dirt.
* Step 2: Apply a thread-locking compound to the bolts to prevent them from loosening.
* Step 3: Install the bolts and tighten them to the recommended torque specification:
> 3116 Cat: 140 N·m (103 lb-ft)
* Step 4: To prevent thread damage, do not over torque the pressure plate bolts.
Note: Refer to the specific engine manual or technical data for your model for precise instructions and specifications, as they may vary slightly for different engines and models.
