1. Get in the driver's seat and adjust the seat, mirrors, and steering wheel to your liking.
2. Put on your seatbelt.
3. Insert the key into the ignition and turn it to the "ON" position.
4. Press the clutch pedal all the way down and shift the gear stick into first gear.
5. Slowly release the clutch pedal while applying pressure to the gas pedal.
6. The vehicle will start to move forward. Continue to shift gears as necessary as the vehicle accelerates.
7. To use the 4x4, shift the transfer case lever into the "4H" or "4L" position.
4H is for high-range four-wheel drive and is suitable for most off-road conditions. 4L is for low-range four-wheel drive and is used for extreme off-road conditions where low speeds and high torque are required.
8. Continue to drive the vehicle as desired.
9. To stop, release the gas pedal and apply pressure to the brake pedal.
10. Shift the gear stick into neutral and release the clutch pedal.
11. Turn the key to the "OFF" position and remove it from the ignition.
When using the Chevy Blazer S-10 4x4, be sure to follow all safety guidelines and recommendations. Use the 4x4 system only when necessary and be aware of the vehicle's limitations.
