1. Preparation:
- Park your Peugeot Vivacity on a stable and level surface.
- Turn off the engine and allow it to cool down.
- Engage the parking brake to secure the scooter.
2. Remove the Front Cover:
- Locate the front cover of your Peugeot Vivacity, usually held in place by screws or bolts.
- Remove the screws or bolts using the appropriate tools.
- Carefully remove the front cover, exposing the speedometer assembly.
3. Disconnect the Speedometer Cable:
- Identify the speedometer cable connected to the speedometer assembly.
- Disconnect the speedometer cable by gently pulling it out of the connection point.
4. Remove the Speedometer Assembly:
- Locate the screws or bolts holding the speedometer assembly in place.
- Remove the screws or bolts using the appropriate tools.
- Carefully remove the speedometer assembly from the scooter.
5. Replace the Speedometer:
- Take the new speedometer and place it in the appropriate position on the scooter.
- Secure the new speedometer using the screws or bolts you removed earlier.
6. Reconnect the Speedometer Cable:
- Reattach the speedometer cable to the connection point on the new speedometer assembly.
- Ensure the cable is securely connected.
7. Reinstall the Front Cover:
- Reinstall the front cover you removed earlier.
- Secure the cover using the screws or bolts you removed during disassembly.
8. Test the Speedometer:
- Turn on the ignition of your Peugeot Vivacity.
- Check if the speedometer is displaying the correct speed as you accelerate and decelerate.
Note:
It is important to note that the process of changing the speedometer may slightly vary depending on the exact model and year of your Peugeot Vivacity. Refer to the specific owner's manual or technical documentation for your scooter to ensure accurate instructions. If you are not confident in performing this task, it is advisable to consult a professional mechanic.
