A flat-head screwdriver
A Phillips-head screwdriver
A 10mm socket wrench
A pair of pliers
A pry bar
Here are the steps to remove the headlights:
1. Open the hood of your vehicle.
2. Locate the two screws on the top of the headlight assembly. Use the Phillips-head screwdriver to remove these screws.
3. Locate the two screws on the bottom of the headlight assembly. Use the Phillips-head screwdriver to remove these screws.
4. Use the flat-head screwdriver to pry open the plastic clips that hold the headlight assembly in place. There are four clips on each side of the headlight assembly.
5. Once all of the clips are pried open, carefully lift the headlight assembly out of the vehicle.
6. Disconnect the electrical connector from the back of the headlight assembly. Use the pliers to squeeze the release tab on the connector and then pull it apart.
7. To remove the light bulb, turn the bulb counterclockwise and pull it out of the socket.
8. To reinstall the headlight assembly, simply reverse the steps above.
Here are some additional tips:
Be careful not to drop the headlight assembly. It is made of glass and could break if it is dropped.
Make sure that the electrical connector is properly connected before reinstalling the headlight assembly. If the connector is not properly connected, the headlights will not work.
Test the headlights to make sure that they are working properly before you close the hood of your vehicle.
