1. Locate the Brake Light Assembly: Open the rear hatch or tailgate of your Jeep Cherokee Sport. On each side of the vehicle, you will see a brake light assembly, which is usually located on the outer edge of the cargo area.
2. Remove the Access Cover: In most Cherokee models, there's an access cover on the inside of the cargo area that provides access to the brake light bulbs. Use the ratchet or wrench to loosen and remove the screws or clips holding the cover in place.
3. Identify the Bulb: Once the access cover is removed, you should be able to see the brake light bulb. The bulb is usually held in place by a twist-and-lock mechanism or a socket.
4. Remove the Old Bulb: If the bulb is held by a twist-and-lock mechanism, simply turn it counterclockwise and pull it straight out. If it's secured with a socket, gently push down and turn the bulb counterclockwise to release it.
5. Install the New Bulb: Take the new brake light bulb and insert it into the socket. Make sure that the bulb is firmly seated and properly aligned.
6. Secure the New Bulb: If there was a twist-and-lock mechanism, turn the bulb clockwise until it locks in place. If it has a socket, push the bulb in and turn it until it locks into position.
7. Reattach the Access Cover: Once the new bulb is installed, replace the access cover and secure it with the screws or clips you removed earlier.
8. Test the Brake Light: Ask someone to press the brake pedal while you check that the new brake light is working properly. Ensure the light is bright and visible.
Remember, the steps may vary slightly for different model years of the Jeep Cherokee Sport, so it's always a good idea to consult your owner's manual for specific instructions related to your vehicle. Additionally, if you encounter any difficulties or are unsure about any part of the process, consider seeking professional assistance from a mechanic or automotive technician.
