- Phillips-head screwdriver
- New low beam bulb (H4 or 9003 type)
Instructions:
1. Park your vehicle on a level surface and turn off the engine. Allow it to cool down if it has been running.
2. Open the hood of your vehicle. Locate the low beam headlight assembly on the front of the vehicle. It is usually located behind a plastic cover.
3. Remove the plastic cover by unscrewing the Phillips-head screws that hold it in place.
4. Locate the low beam bulb. It is typically held in place by a metal clip or a twist lock.
5. If there is a metal clip, use a flat-head screwdriver to release it and remove the bulb. If there is a twist lock, turn it counterclockwise to unlock and remove the bulb.
6. Disconnect the electrical connector from the bulb.
7. Insert the new low beam bulb into the socket. Make sure it is properly seated.
8. Reconnect the electrical connector.
9. Replace the metal clip or twist lock to secure the bulb.
10. Replace the plastic cover.
11. Close the hood of your vehicle.
12. Test the low beam headlights to ensure they are working properly.
