1. Gather Necessary Parts:
- Front disc brake spindles
- Disc brake rotors
- Disc brake calipers and brackets
- Master cylinder
- Brake lines and fittings
- Brake booster (optional)
- Brake pads and hardware
- Rear brake proportioning valve (optional)
2. Remove Drum Brake Components:
- Remove the wheels.
- Unbolt and remove the drum brake backing plates, brake shoes, and wheel cylinders.
- Disconnect the brake lines from the wheel cylinders.
- Remove the drum brake hub assemblies.
3. Install Disc Brake Components:
- Install the new front disc brake spindles.
- Mount the disc brake rotors onto the spindles.
- Install the disc brake calipers and brackets.
- Connect the brake lines to the calipers.
4. Rear Brake Modifications:
- Upgrade the rear drum brakes to a disc brake system or install a rear brake proportioning valve to distribute brake fluid pressure properly between the front and rear brakes.
5. Master Cylinder and Brake Booster:
- Replace the original master cylinder with one designed for disc brakes.
- If desired, install a brake booster to assist in brake pedal effort.
6. Bleeding the Brake Lines:
- Bleed the brake lines to remove any air and ensure proper braking.
7. Test and Inspect:
- Once everything is installed and the brake lines are bled, test the brakes to ensure proper functionality.
- Inspect the system for any leaks or loose connections.
Note: It's highly recommended to seek the assistance of a qualified mechanic or brake specialist to perform this conversion safely and correctly, as improper installation can compromise the vehicle's braking performance and safety.
