What is the crank shaft sensor on a 95 dodge avenger 6 cylinder 2.5L?

The crankshaft position sensor (CKP) is a vital part of your Dodge Avenger's engine control system. It provides the engine control module (ECM) with information about the position and speed of the crankshaft. This information is used by the ECM to control fuel injection, ignition timing, and other engine functions.

The CKP is located on the front of the engine, near the crankshaft. It is a small, cylindrical sensor with a wire connector. The sensor is mounted in a hole in the engine block and is secured with a bolt.

The CKP is a magnetic induction sensor. It uses a magnet to generate a voltage that varies with the speed of the crankshaft. The ECM uses this voltage to determine the engine speed.

The CKP is a critical sensor for your Avenger's engine. If it fails, the engine will not be able to run properly. If you are having problems with your engine, the CKP may be the cause.

Here are some symptoms of a faulty CKP:

* Engine stalling or hesitating

* Rough idling

* Poor fuel economy

* Check Engine Light on

If you are experiencing any of these symptoms, you should have your CKP checked by a qualified mechanic.