Step 1: 22 ft-lb (30 Nm)
Step 2: 44 ft-lb (60 Nm)
Step 3: 66 ft-lb (90 Nm)
The proper tightening sequence for the cylinder head bolts is shown in the following diagram:
[Image of cylinder head bolt tightening sequence]
1. Tighten the bolts in numerical order from 1 to 10, following the sequence shown in the diagram.
2. After all the bolts have been tightened to the specified torque, retorque them in the same sequence to ensure that they are properly seated.
It is important to follow the specified torque specifications and tightening sequence to avoid damaging the cylinder head and/or the engine block.
