- Pliers
- Screwdriver
- Fuel line wrench
- Replacement fuel pump
Steps to Remove the Fuel Pump:
1. Park the vehicle on a level surface and turn off the engine.
2. Locate the fuel pump access hatch under the rear seat of the vehicle.
3. Remove the screws holding the access hatch cover in place and lift the cover off.
4. Use the fuel line wrench to disconnect the fuel lines from the fuel pump.
5. Use a screwdriver to remove the screws holding the fuel pump in place.
6. Carefully lift the fuel pump out of the fuel tank.
7. Inspect the fuel pump for damage and replace it if necessary.
8. Reinstall the fuel pump in the reverse order that it was removed.
9. Reconnect the fuel lines and tighten the screws holding the fuel pump in place.
10. Replace the access hatch cover and tighten the screws.