- Socket set
- Wrench set
- Jack and jack stands
- Safety glasses
- Gloves
Instructions:
1. Park the vehicle on a level surface and turn off the engine.
2. Set the parking brake and chock the wheels.
3. Disconnect the battery negative terminal.
4. Raise the vehicle with the jack and jack stands.
5. Locate the starter motor on the driver's side of the engine.
6. Remove the bolts that hold the starter in place.
7. Disconnect the electrical connections from the starter.
8. Remove the starter from the vehicle.
9. Clean the starter mounting surface on the engine block.
10. Install the new starter.
11. Reconnect the electrical connections.
12. Install the bolts that hold the starter in place.
13. Lower the vehicle.
14. Reconnect the battery negative terminal.
15. Start the vehicle and check for proper operation.
