1. Park the car on a level surface.
2. Turn off the engine and allow it to cool down.
3. Locate the fuel pump under the rear seat.
4. Loosen the fuel pump securing bolts.
5. Pull the fuel pump up and out of the tank.
6. Disconnect the fuel line and electrical connector from the pump.
7. Install the new fuel pump by reversing the above steps.
* Here are some additional tips for removing the fuel pump:
Make sure that you have the correct tools for the job. You will need a flat-head screwdriver, a Phillips-head screwdriver, and a wrench.
You may need to remove the seat to access the fuel pump.
Be careful when removing the fuel pump. There is a lot of gas in the tank, and you don't want to spill any.
If you're not comfortable with this task, it's best to have a qualified mechanic do it for you.
